Pioneer TS W3001D4 12" Subwoofer + JA1200D Monoblock Amplifier + Box

Pioneer TS-W3001D4 Description:

Competition-class 3000W sub: all the power in less enclosure space

A major benefit of this sub is its Air Suspension System, which creates an airtight space between the two cones within. This enables the main cone to move solidly and smoothly, reflecting air pressure from the enclosure. The result is a very tight bass; even in a very small enclosure.

IMPP ConeThe Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The TS-W3001D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier

Pioneer TS-W3001D4 Features:

• Woofer Cone Material Interlaced Carbon Fiber/Glass Fiber Reinforced
• Surround Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
• Voice Coil Dual 4-Layer, Long Voice Coil
• Voice Coil Wire Copper
• Voice Coil Bobbin Phenol Resin Coated Glass Cloth
• Projected Pole Yoke with Vented Pole
• Magnet Construction Double Stacked (110oz)
• Basket Design Aluminum Die-Cast Rigid Chassis
• Gasket 1-Piece Rubber
• Wire Terminals Integrated Single-Sided Silver Compression Terminals
• Specifications
• Watts MAX. Music Power 3000 Watts
• Watts Nominal Power Handling 1000 Watts
• Frequency Response 18 Hz to 700 Hz
• Sensitivity 89 dB
• Ohm Rating D4: sub can be wired as 2 or 8 ohm
• Recommended Enclosure 0.50 ~ 1.0 Cubic Feet
• Dimensions 329 mm x 214.2 mm
• Mounting Depth 188.8 mm

Juice JA1200D Amplifier Description

Give your sound system some style with a Juice JA1200D amplifier. These beauties look expensive, so you may not believe your eyes when you check the price. And, you get high-end features like silver plated outputs, high level speaker input, variable sensitivity, and a 1-year warranty — for less than you might expect.

Whether you're looking to amplify a subwoofer or the speakers in your system, the JA1200D is an affordable solution — and the included speaker-level input adapter makes it easy to connect to any setup. The variable high- and low-pass filters let you contour the sound to match your speaker setup and your vehicle.

• 1200 Watts D Class Amplifier
• High level speaker input
• Pulse Width Modulated (PWM) MOSFET Power Supply
• Variable input sensitivity; RCA input 0.2V to 6V
• Thermal, Overload and Short circuit protection
• Excellent muting circuitry prevents turn on/off ‘pops’
• Silver plated power connectors for optimum power distribution
• Silver plated speaker connectors for optimum signal output