Clarion SRG1023R 200W 2-way 10cm (4") coxail speakers

Quickfind Code
33068
Quick Summary:
The easiest way to upgrade from your factory installed system. Clarion’s GOOD series (Component system speakers / Multiaxial speakers / Coaxial speakers / Dual-cone speakers / Balanced-drive tweeter) let you pursue better sound while remaining budg
Special Price £39.99 Save £10 (20%) rrp: £49.99
Discontinued
  • Free Car Air Freshener with every order Free Car Air Freshener with every order
  • Next Day Delivery available on all order before 5pm Next Day Delivery available on all order before 5pm
  • Easy Returns Easy Returns
  • 1 Year Easy Warranty 1 Year Easy Warranty

clarion

Sorry, this product has been discountinued. We recommend the following product.

In Phase XTC10.2 4" coaxial speaker system 160 watts peak directional tweeter
Key Features

Clarion SRG1023R 200W 2-way 10cm (4") coxail speakers

MIPP cone woofer for low distortion and high-speed response -

Propylene with mica particles blended in is used in this injection-moulded cone to attain superior response, making it ideal for digital sources.

Powerful strontium magnet for dynamic bass response -

Strontium magnets have a magnetic flux density that is far higher than conventional ferrite magnets, enabling reproduction of dynamic bass sounds from a relatively small voice coil.
Technical Specifications

Specification:

  • 200 watts maximum power handling
  • 100 mm MIPP cone woofer
  • 25 mm metallised PEI balanced-drive tweeter
  • Powerful strontium magnet for dynamic bass response
Customer Reviews
Write a review
Write Your Own Review


Questions/Answers About This Product

Question: 01 February 2016

Car: Ford Fusion - 2003 - 2005 -

Would this fit into my Ford fusion 2004? What componants would i need to buy with it for installation? Thanks!

Answer:

hi there, the ford fusion with factory three tear require the following parts to fit a aftermarket unit to. Ford Fiesta / Fusion Facia Plate ( 2002-2005 ) AERIAL ADAPTER ISO RADIO TO DIN AERIAL Ford Fusion adapter lead

Question: 01 March 2016

Car: Seat Leon - 1999-2005 -

Do I need any additional adapters etc. to fit to a 2003 Seat Leon?

Answer:

Hi yes you will need some additional parts in order to fit the KMM-BT302 in your Leon. We have listed the parts below. Seat Leon Aerial Antenna Amplifier Adapter All Models Seat Leon Facia Plate 2000 Onwards Seat Leon to Kenwood stalk adapter before 2005

Question: 26 April 2016

Car: Vauxhall Astra - 1991 - 2004 -

Hi. What additional components/adopters will I need to fit on a 01 Vauxhall Astra. Thanks

Answer:

Hi, thanks for your question, the KMM-BT302 should be a straight fit into your astra, however you may require a patch lead & an aerial adaptor, we have listed the parts below for you CTSVX001 Vauxhall steering wheel control interface Kenwood multi-stalk patch lead for new headunits VW Touran Fakra Aerial to DIN Aerial with amplified remote feed

Question: 26 April 2016

Car: VW Golf - 1998 - 2003 MK4 -

Hi, will this fit my car? If so what will I need to buy with it? Cheers

Answer:

Hi, Thanks for your question, the KMM-BT203 should be a straight fit into your Golf MK4, however you may need an aerial adapter & patch lead, please see the parts listed below. VW Touran Fakra Aerial to DIN Aerial with amplified remote feed VW Golf to Kenwood stalk adapter 1998-2004

Question: 03 May 2016

Car: BMW Mini (R56) - 2001-2006 -

The only option war R56, I have an 2006 R50 cooper, would this fit my car and what else would I need for it to work, thanks!

Answer:

Hi Thanks for your question, Yes the KMM-BT302 can be fitted to your mini, we have suggested the following parts below BMW Mini Facia Adapter Connects 2 Stalk Adapter Bmw 1/3/5/6/7 Series / Mini CT27AA06 Fakra to Din aerial adapter Kenwood multi-stalk patch lead for new headunits

Question: 04 May 2016

Car: VW Golf - 2003 > MK5 -

I have a MK6 2009. What additional parts would I need?

Answer:

Hi There, To fit the KMM-BT302 ,into your VW GOLF ,you will need a facia kit, wiring harness and aerial adaptor, i will list the part(s) for you CT24VW17 If you need this fitting in your vehicle or need further advise you can contact your local Car Audio Centre store directly for a full quotation and they will be happy to help you http://www.caraudiocentre.co.uk/store-finder.htm VW Golf to Kenwood stalk adapter 2004 onwards

Question: 09 May 2016

Car: Renault Megane - 2002-2007 -

I have an Renault megane extreme FL07WPF And I need all the components to fit this stereo so it works on the controls of my steering wheel. Could you please tell what I need and the cost please?

Answer:

Hi, Thanks for your question, prices are dependent on store location, there are varying fascia panels required to fit the KMM-BT302 & we would need to see your vehicle to determine whether or not you require one. the other parts are suggested below Kenwood multi-stalk patch lead for new headunits CTSRN005 Reanult stereo steering wheel control interface for aftermarket stereo installation VW VOLKSWAGEN antenna adaptor (PC5-52)

Question: 19 May 2016

Car: Vauxhall Zafira - <2005 -

hi there, what would i need for this to fit my mk 1 zafira. and is this also DAB as well as bluetooth?

Answer:

Good Afternoon, In order to install a single din stereo into your car, you will need to purchase a complete installation kit (CTKVX12). This stereo is not dab, for a dab and bluetooth stereo, we would recommend the KDC-BT73DAB. Thanks CTKVX12 Vauxhall Installation Kit Kenwood CD/USB-Receiver with DAB/DAB+-Tuner & Bluetooth

Question: 31 May 2016

Car: BMW 1 Series (E81) - 2004> (E81) -

Fitting to a BMW E81, has steering wheel controls, is it possible to make this compatible?

Answer:

Hi, Thanks for your question, below we have suggested some parts for you to fit the KMM-BT302 including the steering wheel adapter Connects 2 Stalk Adapter Bmw 1/3/5/6/7 Series / Mini CT27AA06 Fakra to Din aerial adapter Kenwood multi-stalk patch lead for new headunits

Question: 06 June 2016

Car: Ford KA - 1997> -

What fascia would I need to purchase with this stereo?

Answer:

Hi thanks for your question, To fit the KMM-BT302 we have suggested some parts below, the fascia suggested is black however it is available in silver & grey. Ford Ka facia (Black) FP-07-03 AERIAL ADAPTER ISO RADIO TO DIN AERIAL Kenwood multi-stalk patch lead for new headunits

Question: 09 June 2016

Car: Peugeot 206 - 2002 > -

Interested in this head unit but would love to keep my stalk controls if possible, what would I need? Car is multiplexed if that helps.

Answer:

Hi You will need the below listed interface to retain the steering controls. Connects 2 CTSPG006 Stalk Int Peugeot 206/307/406/607/807 Kenwood multi-stalk patch lead for new headunits

Question: 14 June 2016

Car: Toyota Corolla - <2007 (Verso) -

What extras will I need for this? would like the silver panel please and steering controls if possible. Many thanks,

Question: 24 June 2016

Car: Renault Clio - 2000 > -

Hi i have a 2003 Clio Dynamique, I just want to know what extras i would need to have this radio installed and ensuring the steering controls and dash screen still worked. Cheers

Answer:

hi there, the dash display will no longer display stereo information, it will only display time and sometimes temp. steering controls for that car are listed below Renault to Kenwood Stalk Adapter 2000 onwards AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 15 July 2016

Car: Citroen C4 - 2004> -

Hi if i fitted this to me car, would i need any additional equipment to keep the steering wheel controls and radio info displays on the dash?

Answer:

Hi To retain the steering controls you will need the below listed interface. Dash display will only show the car information i.e temp,date. CITREON to Kenwood Stalk Adapter VW Touran Fakra Aerial to DIN Aerial with amplified remote feed

Question: 15 July 2016

Car: Ford Fiesta - 2003-2005 -

ia this ok for a Ford. fiesta flame 2004 just needs.it to make calls and music from his iphone e

Answer:

Hi The KMMBT302 will work with any Bluetooth phone and stream music. You will need the below listed parts for installation. FORD FIESTA MK6 FUSION Facia Adapter Ford Fiesta Mk6 / Fusion adapter lead (PC2-80-4) AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 25 July 2016

Car: Fiat Punto - 1999-2005 -

Hi I have an old Fiat Punto Active Sport will this fit in this car please?

Answer:

hi there, yes the kmmbt302 will fit into your car, if your car has the factory radio you may require some parts to change it.

Question: 23 August 2016

Car: Ford Focus - <2004 -

How much to for this in car with steering wheels controls

Answer:

Good morning If you require supply and fitting you will need to contact your nearest car audio centre store directly for a quote on parts and fitting. Our stores addresses and phone numbers are on our website. KMM-BT302 Mechless Car Stereo with Bluetooth USBiPod direct & AUX In.

Question: 03 September 2016

Car: -

Hi. Just wondering what else I'd need to fit this to a 05 seat Ibiza. Thanks.

Answer:

you should only need the following parts ipiso2d if you have steering controls you will also need these CTSST002 Seat steering wheel control interface Kenwood multi-stalk patch lead for new headunits

Question: 10 September 2016

Car: Land Rover Freelander - 2004-2007 -

Hi, I am looking for a new head unit to put in my Land Rover Freelander (2000) but also want to fit a Kenwood KSC-SW11 powered sub unit which I already have. Would this work? Many thanks, Aonghus

Answer:

Hi The KMM-BT302 will work with KSC-SW11. You will need a RCA Phono lead. Oxygen Free RCA Lead (5 metres)

Question: 11 September 2016

Car: Ford Fiesta - <2003 -

i have a 2001 fiesta what fitting kit or adapters will i need for this unit? cheers

Answer:

you will require the following parts to change the radio in your fiesta CT24FD01 Single Din Facia CT20FD01 ISO Adaptor AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 20 September 2016

Car: Peugeot 206 - 2002 > -

Hi Could you let me know what interface connectors I would need for a 206 Verve year 2006. Many thanks

Answer:

Hi, thanks for your question, we have suggested parts to fit the KMM-BT302 CTSPG006 Steering Control Adaptor AERIAL ADAPTER ISO RADIO TO DIN AERIAL CT24PE02 Single Din Facia Single Wire Kenwood patch lead

Question: 20 September 2016

Car: Audi A3 - 2003> -

HI, Does this unit have a detachable front fascia? Kind regards, Adrian

Answer:

Hi, Thanks for your question, the fascia on the KMM-BT302 is removable via a small triangular button on the bottom left of the unit

Question: 25 September 2016

Car: -

hi, with the kenwood kmm-bt302 can you tell me if it comes with the rear wired microphone or if its an extra? thanks

Answer:

hi there, yes this unit comes complete with the external wired mic.

Question: 04 October 2016

Car: -

What adapters will I need for my 2004 clio? Thanks

Answer:

Hi, The adapters are shown in the fitting kit below as per your previous email. Thanks CTKRT04 Complete Head Unit Replacement Kit

Question: 05 October 2016

Car: Vauxhall Astra - 2004> -

Hi, Could you please tell me what else I'll need to replace the CD30 in my 2005 Astra (black dash)? Appreciate your help!! Thanks.

Answer:

God afternoon to fit the single din stereo you will need the following parts Facia, CT24VX37 wiring harness adapter, CTSVX002.2 stalk control lead, CTKENWOODLEAD2 Antenna adapter, CT27AA14 KMM-BT302 Mechless Car Stereo with Bluetooth USBiPod direct & AUX In.

Question: 05 October 2016

Car: Ford Focus - <2004 -

what do i need to fit this to my Ford Fiesta 1998-1999 model?

Answer:

Hi, the other parts you will require to complete the install= CT24FD02 fascia adapter CT20FD01 harness adapter IPISO2D antenna adapter thanks

Question: 05 October 2016

Car: Ford Fiesta - <2003 -

what do I need to fit this in my ford fiesta 1998-1999 model

Answer:

Hi, the other parts you will require to complete the install= CT24FD02 fascia adapter CT20FD01 harness adapter IPISO2D antenna adapter thanks

Question: 29 October 2016

Car: Fiat -

Hi, does this come with a remote microphone for phone calls?

Answer:

yes it comes with microphone in the box for the bluethooth .

Question: 11 November 2016

Car: Vauxhall Zafira - 2007> -

Hi. My zafira is a 2008 what would I require to upgrade to the Kenwood bt302 Cheers Chris

Question: 25 November 2016

Car: Vauxhall Corsa - 1993 - 2003 -

Hi soon I will be borrowing my dads corsa and as it's old it has the standard radio and I want a Bluetooth radio fitted so I can play my music as the radio doesn't have many functions

Answer:

Hi You can stream music to the Kenwood KMM-BT302. You will need the below listed parts for installation. CT24VX01 Single Din Facia AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 28 November 2016

Car: Ford Focus - 2004> -

Hi. What would I need to fit this in a 2007 Ford Focus Zetec, and to work with the steering controls? Thanks!

Question: 01 December 2016

Car: Honda Integra - 1998 - 1999 -

Hi what extras would i need to install the Kenwood KMM-BT302 into a 1996 Honda Integra Thanks

Answer:

Good morning To fit the KMM-Bt302 to your integra you will need a wiring harness adapter. Part number, ICT20-109 KMM-BT302 Mechless Car Stereo with Bluetooth USBiPod direct & AUX In.

Question: 05 December 2016

Car: Daewoo Matiz - 1998> -

Hi we actually have a Cheverolet Matiz 2008. Would I be able to fit this in my car as it only an ISO connector and the aerial plug on it's present stereo. I guess I would need some kind of adapter.

Answer:

Hi, Thanks for your question, we can not find any parts for that year of Matiz, they only go up to 2005, the KMM-BT302 may well be a straight fit, it depends on the plugs behind your original unit, other than that you mat need an ISO harness. The only one we could find is 20-107 Daewoo Radio ISO lead from InCarTec

Question: 16 December 2016

Car: -

Note: The car is an R50, 2003 Mini. Is this unit mechanically installed using 4 screws, screwed in from the front i.e. standard mini installation. Also does it work with steering wheel controls ? M

Answer:

Hi For installation you will need the below listed fascia plate which is screwed down using 4 screws. then the cage is locked into the fascia. you will need the below listed parts to retain the steering controls. Hope this helps if not contact your local store. https://www.caraudiocentre.co.uk/store-finder.htm CT24BM03 Single Din Facia CTSBM004.2 Steering Control Adaptor Single Wire Kenwood patch lead

Question: 21 January 2017

Car: Vauxhall Astra - <2004 -

hi looking to see if this stereo would fit into my car replacing the old factory fitted one or do you have a similar stereo that will many thanks

Answer:

Hi The KMM-BT302 can be installed in your Vauxhall Astra. You will need the following parts for installation. CT20VX01 ISO Adaptor CT24VX05 Single Din Facia CT27AA14 Aerial Adaptor

Question: 05 February 2017

Car: BMW 1 Series (E81) - 2004> (E81) -

Will this fit in my Car? 2005 120d BMW.

Answer:

yes it will fit into your car, if you have the standard radio still fitted you will require some parts, also does your car have the reverse parking sensors

Question: 27 February 2017

Car: Citroen Xsara - 2002 > -

What parts would I need to fit this radio to my 51 plate Xsara ?

Answer:

Hi, Thanks for your question. Please see below for the suggested parts. CT24CT04 Single Din Facia

Question: 28 February 2017

Car: Toyota Corolla - 2002-2006 -

I'm looking to see if this would fit my vehicle or the cost of extras required so it will fit. 😎

Answer:

Hi, Thanks for your question, we have checked for you & the KMM-BT302 can be fitted into your Corolla, with some fitting parts required, we would need to know if your car has steering wheel controls to assess which parts are required & we would need to check the cables behind the radio to ensure the correct cables are ordered, as there are variations. You would be looking at around £75.00 for parts & £60 for fitting.

Question: 10 March 2017

Car: Seat Ibiza - 2008> -

I want to install this in my Ceat Ibiza 2005 will it fit ? does this comes with all cables and connectors etc. thanks

Answer:

Hi The Kenwood KMM-BT302 can be installed in your Seat Ibiza. You will need the following parts fro installation. CT24ST07 Single Din Facia CT27AA14 Aerial Adaptor CT20ST01 ISO Adaptor

Question: 22 March 2017

Car: BMW 3 Series (E46) - 1999-2005 (E46) -

HI Will this fit in my bmw e46 2002 5 door 330d. It has steering controls.

Answer:

Good afternoon you will require additional parts to complete the installation: CT24BM01 BMW Fascia Plate (Black) CTSBM003.2 BMW Steering Wheel Control Interface CTKENWOODLEAD2 Patch connection for stalk CT27AA14 Antenna adpter CT24BM01 Single Din Facia CTSBM003.2 Steering Control Adaptor Single Wire Kenwood patch lead CT27AA14 Aerial Adaptor

Question: 06 April 2017

Car: Fiat Punto - 2005> (Grande) -

What fitting equipment would I need to buy?

Answer:

Hi, Please see the link provided for installation parts required to install this Kenwood unit into your Grande Punto. Thanks CTKFT06 Complete Head Unit Replacement Kit

Got a Question about this Product?

The email address is required to email you when your question has been answered.

N.B. Questions are answered during office hours
Please don't put sensitive info in the question.

Fitting Services

Need help with Installation?

Here at CarAudioCentre we offer a professional and reputable fitting service in all our stores. For all fitting enquiries and bookings please visit or call one of our nationwide stores. Our fitters can install your new car stereo, DAB radio, audio visual, speakers, subwoofers or amplifier. We can also help to connect your iPod or MP3 player to you existing audio unit and can offer the best advice on the right in-car entertainment for your vehicle, to further this more we also offer a total 100% custom installation service for demo and show vehicles. So if you have an idea come on in and run it past us, the possibilities are endless and we are never too busy for an enthusiastic chat about our favourite subject.

Please note:

"That our two year warranty on products is only applicable to purchases made directly from us and that have been fitted in one of our stores."

Our Stores:

Nottingham:
542 546 Mansfield Road, Sherwood NG5 2FR
Tel: 0115 9624 986
Ilford:
743-745 Eastern Ave, Newbury Park, London, IG2 7RT
Tel: 0208 599 2368
Tooting:
835 Garratt Lane, Tooting, London, SW17 0PG
Tel: 0208 971 9181