JL Audio JX-1000.1 - 1000W Monoblock Class D Subwoofer Amplifier

Quickfind Code
33007
Quick Summary:
This amazingly compact amplifiers delivers a real kilowatt of power at an unbelievably great price. Using a tough-as-nails Class D circuit with a robust MOSFET power supply.
Special Price £299.99 Save £50 (14%) rrp: £349.99
Discontinued
  • Free Car Air Freshener with every order Free Car Air Freshener with every order
  • Next Day Delivery available on all order before 5pm Next Day Delivery available on all order before 5pm
  • Easy Returns Easy Returns
  • 1 Year Easy Warranty 1 Year Easy Warranty

jl audio

Sorry, this product has been discontinued. Please call us for alternatives

Key Features

JL Audio JX-1000.1 - 1000W Monoblock Class D Subwoofer Amplifier

The JX1000/1D is fully capable of driving the toughest subwoofer loads with very good control and excellent sound quality.
Targeted specifically for subwoofer applications, the JX1000/1D includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote boost control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
Technical Specifications

Rated Continuous (RMS) Power @ 14.4 V:

  • @ 4 Ω - 500 W RMS x 1
  • @ 3 Ω - 750 W RMS x 1
  • @ 2 Ω - 1000 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V:

  • @ 4 Ω - 500 W RMS x 1
  • @ 3 Ω - 700 W RMS x 1
  • @ 2 Ω - 900 W RMS x 1

General Specifications:

  • Frequency Response - 20 Hz - 150 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power - >75 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W - >45 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω - >1000 / 50 Hz
  • Damping Factor @ 2 Ω - >500 / 50 Hz
  • THD+N @ Rated Power - <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs - 2 V - 10 V RMS
  • Input Voltage Range @ RCA Inputs - 200 mV - 4 V RMS
  • Min.Copper Power / Ground Wire Gauge - 4 AWG wire
  • Fuse Rating - 80 A (AFS, AGU or MaxiFuseâ„¢)

Signal Processing:

  • Filter Mode(s) - Low-Pass only
  • Filter Slope(s) - 12 dB/octave
  • Filter Frequency Range - 50 Hz - 200 Hz
  • Detented, Calibrated Filter Freq. Potentiometer - No
  • Filter Defeat Function - No
  • Infrasonic Filter - none
  • Bass Boost EQ - 0 to +12 dB @ 45 Hz
  • Output Polarity Switch - No
  • Remote Subwoofer Level Control - Optional (RBC-1)
  • Remote Bass EQ Boost Control - No
  • Pass-Through Preamp Output - Buffered

Physical Specifications:

  • Height (H) - 2.09 in / 53 mm
  • Width (W) - 10.94 in / 278 mm
  • Depth (D) - 7.68 in / 195 mm
  • Net Weight - 3.75 lb / 1.70 kg
Customer Reviews
Write a review
Write Your Own Review


Questions/Answers About This Product

Question: 28 April 2016

Car: Ford Mondeo - <2004 -

How to connect radio to column stalk on car

Answer:

Good Morning, In order for your steering controls to work on your Ford Mondeo, you will need to purchase a steering control loom (CTSFO001.2) aswell as a patch lead (CTKENWOODLEAD2) Thanks Ford to Kenwood stalk adapter upto 2004

Question: 24 May 2016

Car: Renault Scenic - <2000 -

Will this stereo fit in the Grand Scenic 2006 plate?

Answer:

Hi, Thanks for your question, the Kenwood KDC-200UB can be fitted into your Scenic

Question: 23 July 2016

Car: Vauxhall Omega - 1995-2000 -

Hi will this fit my car. and are there adapters to make the steering wheel controls work. yours e fisher

Answer:

Hi The KDc-200Ub can be installed in your Vauxhall Omega. You will need the following parts for installation. Vauxhall Meriva Facia Plate (Black) 2003 Onwards AERIAL ADAPTER ISO RADIO TO DIN AERIAL Vauxhall Omega to Kenwood stalk adapter up to 2004

Question: 28 November 2016

Car: Peugeot 206 - 2002 > -

Hello will this fit my car Peugeot 206 2004 hdi and will I still be able to use the steering wheel controls thanks

Answer:

Hi, Thanks for your question, the KDC-200UB can be fitted with a fitting kit like the one shown below. CTKPE01 Complete Head Unit Replacement Kit Single Wire Kenwood patch lead AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 12 December 2016

Car: Nissan Primera - <1999 -

HI would this fit my nissan primera 1996 reg

Answer:

Hi, Thanks for your question, without seeing the vehicle, it is difficult to assess as fitting parts for an after market stereo only start from 1998/99. It may be the case that the KDC-200UB is a straight fit with an ISO harness & aerial adapter. We have shown parts below but these ARE later year parts. CT20NS02 ISO Adaptor AERIAL ADAPTER ISO RADIO TO DIN AERIAL

Question: 20 December 2016

Car: Vauxhall Corsa - 2000 - 2004 -

hi i have a Corsa C 54 reg with a CDR 2005 stereo which came with the car, i have brought a T1 Audio T1-24VX01 PACK from amazon will this new stereo fit my car and will i need any other tootls ect ?

Answer:

Hi, thanks for your question, we are not familiar with this Amazon kit as it is not something that we supply but it says on the site that it will do the job & also shows that it can be sold with a single din radio so the KDC-200UB should be fine.

Question: 29 January 2017

Car: Ford Focus - <2004 -

I HAVE BOUGHT THIS RADIO AND SEE THAT THERE IS ONE LEAD THAT IS MARKED REMOTE CON(WHERE DOES THIS LEAD GO) AND ONE LEAD THATS MARKED MUTE SO HOW DOES ONE WIRE THIS UP?I WONT BE USING THE ANT LEAD.

Answer:

the mute cable is for when you have a separate existing car phone kit and the remote cont is for steering controls

Question: 12 April 2017

Car: BMW 3 Series (E46) - 2005> (E90) -

hi, can you tell me please why i have to set up the bass,treble,midrange & subwoofer levels everytime i turn car off and then return the levels are back to factory settings, im baffled, many thanks.

Answer:

you have installed the radio incorrectly, remove the radio and swap the red and yellow cables over on the connectors this will retain the memory

Question: 24 September 2017

Car: Mazda MX-5 - 2001 > -

I have bought this car with a KDC-200UB fitted but no manual. I cannot download the manual on my old PC. Please can I buy a manual from you?

Answer:

Hi, Please contact the online team on 0330 320 5050 for further help.

Got a Question about this Product?

The email address is required to email you when your question has been answered.

N.B. Questions are answered during office hours
Please don't put sensitive info in the question.

Fitting Services

Need help with Installation?

Here at CarAudioCentre we offer a professional and reputable fitting service in all our stores. For all fitting enquiries and bookings please visit or call one of our nationwide stores. Our fitters can install your new car stereo, DAB radio, audio visual, speakers, subwoofers or amplifier. We can also help to connect your iPod or MP3 player to you existing audio unit and can offer the best advice on the right in-car entertainment for your vehicle, to further this more we also offer a total 100% custom installation service for demo and show vehicles. So if you have an idea come on in and run it past us, the possibilities are endless and we are never too busy for an enthusiastic chat about our favourite subject.

Please note:

"That our two year warranty on products is only applicable to purchases made directly from us and that have been fitted in one of our stores."

Our Stores:

Nottingham:
542 546 Mansfield Road, Sherwood NG5 2FR
Tel: 0115 9624 986
Ilford:
743-745 Eastern Ave, Newbury Park, London, IG2 7RT
Tel: 0208 599 2368
Tooting:
835 Garratt Lane, Tooting, London, SW17 0PG
Tel: 0208 971 9181