Pioneer TS-SW3001S2 - 12" 2 ohm Shallow Mount 1500W subwoofer

Rating:
100% of 100
Quickfind Code
32864
Quick Summary:
Pioneer offers a great way to get exceptional bass in tight quarters. These shallow-mount TS-SW3001S2s subs feature a low profile, so you can put them in extremely thin boxes.
Special Price £94.85 Save £105.14 (53%) rrp: £199.99
In stock
  • Free Car Air Freshener with every order Free Car Air Freshener with every order
  • Next Day Delivery available on all order before 5pm Next Day Delivery available on all order before 5pm
  • Easy Returns Easy Returns
  • 1 Year Easy Warranty 1 Year Easy Warranty

pioneer

Key Features

Pioneer TS-SW3001S2 - 12" 2 ohm Shallow Mount 1500W subwoofer

Pioneer offers a great way to get exceptional bass in tight quarters. These shallow-mount TS-SW3001S2s subs feature a low profile, so you can put them in extremely thin boxes. They'll fit easily behind most truck bench seats while thumping just as hard as conventional subs.

Pioneer's Air Suspension Control System locks in air between the main cone and the internal drive cone, causing it to act like a spring. This eliminates the need for a spider structure, reducing the depth of the sub without sacrificing sound quality. The result is punch that goes just about anywhere.

The TS-SW3001S4 12' shallow-mount sub presents a 2-ohm load and handles up to 400 watts RMS. Pioneer reinforces the injection-molded polypropylene cone with basalt and carbon fiber for rigidity and responsiveness. The 3-layer surround sandwiches a layer of fiber between two layers of urethane to keep your bass under control. Pair this sub with a special low-profile enclosure from Pioneer to get the most out of this slender powerhouse.

Pioneer TS-SW3001S2 features:

  • 12' 2-ohm shallow subwoofer
  • interlaced basalt and carbon reinforced IMPP cone
  • 3-layer urethane and fiber-woven radial surround
  • cast aluminum basket
  • Air Suspension Control System eliminates traditional spider structure
  • power range: 50-400 watts RMS (1,500 watts peak power)
  • frequency response: 20-230 Hz
  • sensitivity: 93 dB
  • mounting depth: 3-1/4'
  • sealed box volume: 0.5-1.0 cubic feet
  • ported box volume: 0.65-1.0 cubic fee
Customer Reviews
Write a review
Write Your Own Review


Questions/Answers About This Product

Question: 04 June 2016

Car: Renault Megane - Megane III 2007> -

Would this amp be plug and playable with the Renault oem stereo and a pair of alpine spg 13cs. Thanks.

Answer:

hi there, the amp will be fine to work on the factory set up on your Renault as it has a high level input option (this will come direct form your factory unit)

Question: 18 July 2016

Car: Renault Megane - Megane III 2007> -

I have the quad lock connector for the radio with a connect2 steering hareness in my car is it still possible to output via existing speaker wiring? I have a Sony Mex-5100bt Thanks Dan

Answer:

Hi, thanks for your question, for the GM-D1004 you can use the existing wiring.

Question: 30 July 2016

Car: VW Polo - 1998 - 2004 -

i am retaining OEM Beta head unit. Can that supply pre-outs that would suit this amp? If not can this amp recieve powered outputs? Can you supply connectors to avoid cutting wiring harness? Thanks!

Answer:

Hi This amplifier is universal will work in your VW Polo without any additional leads and there is no need to cut any cables.

Question: 12 August 2016

Car: Ford KA - 1997> -

Factory head unit. Is this plug and play or will I have to connect it to the battery as the radio fuse is 7.5 I heard. And will I have to cut any wires for the speakers or do I need a harness?

Answer:

Hi You can use the below T Harness. This way yo do not have to cut any cables. Connects2 Ford KA T-Harness Parrot Adapter for Phone Kit 1996 Onwards

Question: 30 September 2016

Car: Ford Focus - 2004> -

Hi is this plug and play in focus 2014 Factory head unit. or will I have to connect it to the battery as the radio fuse is 7.5 I heard. And will I have to cut any wires.

Answer:

Hi Contact your local store. https://www.caraudiocentre.co.uk/store-finder.htm

Question: 21 February 2017

Car: Ford Fiesta - 2008> -

Hi I'm thinking of buying this a amp. to run with the factory head unit of my 2013 fiesta. Do you have a wiring harness to simplify the fitting. Will run set of Alpine SPR-60C + SPR-60 with the amp

Answer:

Good afternoon you could use a t-harness to simplify the cabling (CT10FD09). CT10FD09 Parrot T-Harness

Question: 01 April 2017

Car: Toyota -

Does this come with iso connector for the speaker terminals and not bare wires that need to cut and spliced into harness? Also have an aftermarked hu fitted so do I need a T harness?

Answer:

Hi This has stanadrd ISO connectors. You will not need an T harness as you are using an after market unit.

Question: 04 June 2017

Car: Renault Traffic - 2000> -

does this come with all the cables required to fit in a 2012 renault trafic (factory head unit with sat nav )

Answer:

Hi, thanks for your question, this amp requires the correct ISO-T harness to connect

Question: 12 October 2017

Car: Renault Megane - Megane III 2007> -

Hi, does this have a phono preout to an amplifier for a sub?

Answer:

Hi This does not have any preout for an external amplifier.

Question: 15 December 2017

Car: BMW 3 Series (E46) - 2005> (E90) -

2010 BMW E92 with Base head unit. Will this amp work with the base head unit and what connectors would I need. Will I need to downgrade the signal from the head unit using an rca to speaker adapter.

Answer:

Hi The GM-D1004 can work with your original head unit. You will need the below listed T-harness for installation. Long as you use the below harness it will be plug and play. Do not need to use RCA to speaker adapter. CT10BM05 Parrot T-Harness

Question: 23 December 2017

Car: Audi A4 - 2007> -

How can I bridge 2 channels of this amp to drive 2 full range speakers and a single subwoofer?

Answer:

Hi Please contact your local store. https://www.caraudiocentre.co.uk/store-finder.htm

Question: 04 January 2018

Car: BMW Z4 (E85) - 2002-2008 (E85) -

Hi, I have the MVH-X380BT, together with the steering control harness already fitted. Do I need any extra cables to fit this to the set up...is it just plugged into the existing harness? Many thanks.

Answer:

you shouldnt require anything else to use this amplifier with what you have

Question: 08 January 2018

Car: Jaguar X - Type - 2002 > -

Hi if I but this amp for my x type will I need a harness to connect it up? Thanks

Answer:

you would need to know if your car already has an amplifier from factory as some of the jaguars do, if yours doesnt then you could use the following wiring loom but some soldering would be required CT10JG01 Parrot T-Harness

Question: 14 January 2018

Car: Toyota Yaris - 2003 -2006 -

Hi, I already have a Pioneer MVH-X580DAB head unit fitted, would i need anything extra to fit this amp? and does it come with block conectors or loose wires for the input and outputs? cheers

Answer:

Hi As you are using aftermarket system this would plug in between the harness adapter and the radio connector.

Question: 18 February 2018

Car: BMW 5 Series (E39) - 2004> (E60) -

Hi . I have a 2008 e6o with basic stereo . Will this work with mine please , cheers Terry

Answer:

Hi Terry You can use the GM-D1004 in your BMW 5 Series. You will need the below listed T harness for installation. CT10BM05 Parrot T-Harness

Question: 01 March 2018

Car: BMW X5 (E53) - 2006> (E70) -

Hi will this fit in my x5 e70 2009 Also is it plug and play or is soldering required to existing wiring loom Thanks

Answer:

hi it will work in your car, none of these are plug and play they will require soldering into the original wiring loom.

Question: 20 March 2018

Car: Suzuki Ignis - 2002 > -

I have a 2017 Suzuki Ignis SZ-T. This has an installed head unit (I think it is made by Pioneer) but I am hard of hearing and cannot hear this properly. Can this amplifier be used in this model

Answer:

hi, yes it would be compatible with your car, as your car has the pioneer unit fitted it could be used with this amplifier to increase the overall volume of the system

Question: 25 April 2018

Car: BMW 3 Series (E46) - 2005> (E90) -

After purchasing the Connects2 CT10BM05 Parrot T-Harness with this amp, does it become a more simple plug and play install? Thanks

Answer:

the wiring for this amplifier requires you to either solder into the loom or use some kind of crimp connectors but yes a t harness would make it easier as they are colour coded

Got a Question about this Product?

The email address is required to email you when your question has been answered.

N.B. Questions are answered during office hours
Please don't put sensitive info in the question.

Fitting Services

Need help with Installation?

Here at CarAudioCentre we offer a professional and reputable fitting service in all our stores. For all fitting enquiries and bookings please visit or call one of our nationwide stores. Our fitters can install your new car stereo, DAB radio, audio visual, speakers, subwoofers or amplifier. We can also help to connect your iPod or MP3 player to you existing audio unit and can offer the best advice on the right in-car entertainment for your vehicle, to further this more we also offer a total 100% custom installation service for demo and show vehicles. So if you have an idea come on in and run it past us, the possibilities are endless and we are never too busy for an enthusiastic chat about our favourite subject.

Please note:

"That our two year warranty on products is only applicable to purchases made directly from us and that have been fitted in one of our stores."

Our Stores:

Nottingham:
542 546 Mansfield Road, Sherwood NG5 2FR
Tel: 0115 9624 986
Ilford:
743-745 Eastern Ave, Newbury Park, London, IG2 7RT
Tel: 0208 599 2368
Tooting:
835 Garratt Lane, Tooting, London, SW17 0PG
Tel: 0208 971 9181