Kenwood DNX-4250BT 6.1" touch screen AV navigation unit with built in bluetooth

• Question: 27 May 2015
  Car: Ford Focus - 2004>
  
  Ford Focus 2007 1.8 Climate
  Is this unit compatible with this car please?

  Answer: 
  Good Afternoon,
  
  Yes, this unit will fit into your car. However, you will need to purchase some additional parts in orderr to make it fit.
  
  Fascia CT24FD10
  Wiring Loom CTSFO002.2
  Patch Lead CTKENWOODLEAD2
  Ariel Adpater IPIS02D
  
  Thanks

  Found Useful? Yes 

• Question: 27 May 2015
  Car: Volvo XC70 - 2004>
  
  Will this unit fit my Volvo and will I need some extra parts? The car is currently fitted with the HU-850 internal CD Changer Audio Unit. Also, what type of rear view parking camera would be required.

  Answer: 
  Good Afternoon,
  
  Yes, this unit will fit into your car. However, you will need to purchase some additional parts in orderr to make it fit.
  
  Fascia Kit CT23VL01A
  Wiring Loom CT20VL02
  
  Thanks

  Found Useful? Yes 

• Question: 19 May 2015
  will this fit my Peugeot rcz 2.0l diesel gt sport on a 62 plate and what parts will I need

  Answer: 
  Hi yes the DNX-4250BT will fit your 2012 rcz nicely, You will require some parts in order to do this. We have listed the full parts below for you. These would consist of the harness adapter and fitting kit. You will require a special harness if you have parking sensors.
  
  CT23PE04 Peugeot 308cc / GTi Piano blk Double Din Fitting Kit
  Peugeot Stalk adapter to Clarion Stereo
  Kenwood multi-stalk patch lead for new headunits

  Found Useful? Yes 

Question: 07 May 2015
Car: Volvo C70 - 2000 >

Will ghis unit fit no my volvo...if not which one will

Answer: 
Hi

This can be installed in your Volvo c70. We will need to know if the car has a factory amplifier or not. I would suggest you visit your local store.

http://www.caraudiocentre.co.uk/store-finder.htm



Found Useful? Yes 

Question: 06 April 2015
Car: Ssangyong Rexton - 2006>

Hi it's a brand new 15. Plate with this kenwood fitted and the controls on the steering wheel don't work can this be fixed thankyou

Answer: 
hi there yes this can be fixed using the correct can buss steering control harness which i will list below for you. if yours has the phone button on the wheel it will need the CTSSY004.2

and if it hasnt it will need CTSSY001
both will also require a CTKENWOOD2LEAD

Kenwood multi-stalk patch lead for new headunits
Ssangyong Actyon to Kenwood stalk adapter 2006 Onwards

Found Useful? Yes 

Question: 05 April 2015
Car: Mitsubishi ASX - 2010>

Hi

Would this go straight into the new ASXs? The 2014 > models appear to already have double din fascia.

Answer: 
hi there the very latest ASX require a fitting kit to finish the panel of as well as to house the unit correctly. you will also require a harness for the plugs to power the unit.

ct23mt21
ctsmt003
ipis02d

please call to order these parts :)

ISO TO DIN Aerial Adapter

Found Useful? Yes 

Question: 01 April 2015
Car: Mitsubishi Lancer -

What would i need to fit this system into my 2006 evo 9
Cheers

Answer: 

hi

i can't be 100% on which parts you will need as the evo is not on the ststem for parts, your best option in to contact your local store direct and send them a photo of your dash that way the facia can be matched up, some evo models don't need a facia but some do so we need to be sure first

Found Useful? Yes 

Question: 31 March 2015
Car: Honda Civic - 2005 >

i was wkndering what i would need tk fit this into my honda civic 2008 model like cage, fascia etc

Answer: 

hi

to fit the dnx-4250bt in your honda, you will need some parts, these are a facia kit, a steering control interface kit and aerial adaptor

CT23HD09 Double Din fitting kit for Honda Civic Hybrid
CTSHO002 Honda Steering wheel control interface
Kenwood multi-stalk patch lead for new headunits
CT27AA26 Aerial Anetnna convertor for Nissan vehicles 2000> GT13

Found Useful? Yes 

Question: 29 March 2015
Car: Ford Fiesta - <2003

What would I need to fit the unit into my mk6 fiesta?

Answer: 
hi there depending on if it was the big square radio or three tier you will need the following parts. a fascia panel, can buss harness, aerial adapter, patch lead(if steering controls)


FORD FOCUS II / Fusion / Transit / CMAX Facia Adapter
Ford to Kenwood stalk adapter from 2003 onwards
ISO TO DIN Aerial Adapter

Found Useful? Yes 

Question: 23 March 2015
Car: Kia Sorento - 2005>

I was wondering what I would need to install this unit into my 2006 sorento xt

Answer: 
Hi, To install the dnx-4250bt in to your kia you will need a fascia panel. To make this simple for your self we have listed the part required below.

CT23KI13 Double Din Fitting Kit Kia Sorento

Found Useful? Yes 

Question: 17 March 2015
Car: VW Transporter - 2005 >

Hi what do I need to instal this in my 2010 VW California so that parking sensors etc display on screen?

Answer: 
Hi

To fit the Kenwood unit into your transporter you will need the following parts

Facia
Steering wheel controls interface
Aerial adaptor

The parking sensors will not display on screen ,I would suggest fitting a rear view camera


VW Touran Facia Plate
VW Touran to Kenwood stalk adapter 2004 onwards
CT27AA14 Amplifed Aerial Adaptor for Audi

Found Useful? Yes 

Question: 10 March 2015
Car: Nissan Qashqai - 2007>

Would this stereo fit in my 2014 Nissan Qashqai and what additional parts are needed.

Thanks Ian

Answer: 
Hi the dnx 4250bt would fit your qashqai, providing you have the correct parts for instillation. You would need a fascia panel and a wiring harness. The harness will also allow you to retain your steering wheel controls. We have listed the parts required below.
CTSNS009.2
CT23NS20

CT23NS01 Double Din Fitting Kit for Nissan Qashqai 2007>

Found Useful? Yes 

Question: 07 March 2015
Car: Toyota Celica - 2000-2006

I am interested in this Sat Nav. What else would I need to fit it to my 2001 Toyota Celica.

Answer: 
Hi

To install this Kenwood DNX-4250BT in your Toyota Celica, you will need the below listed parts. if the car has steering control that interface is also listed.

Toyota Celica Facia 2000-2006
Toyota Yaris Harness Adapter 1999 Onwards
Toyota to Kenwood stalk adapter

Found Useful? Yes 

Question: 05 March 2015
Car: Saab 9.3 - 2008>

Dear Sir/Madam,
As per Saab website, there is a Kenwood system specifically for the Saab 93: here is the link:http://www.saabparts.com/en-gb/uk/offers/part-offers/kenwood/
Is this the correct unit?

Answer: 
Yes that is the unit. you will also need fascia adapter, ariel adapter and steering control harness aswell. We have fitted double din units into the saab 93. There are various fitments for those cars, not just kenwoods.

Thanks

Found Useful? Yes 

Question: 12 February 2015
Car: Honda Jazz - 2008>

Hi the car is a 2013 jazz, I will supply a genuine Honda double din facia how much would it cost too have it fitted, also I would like too know if you enter Lat & Longitude coordinates into the sat

Answer: 
yes it can fit but is dependant on what the cars trim is
as it would depend on what kit is required
it would be a good idea to visit your local store so they can identify the right parts needed

Found Useful? Yes 
• 

Need help with Installation?

Here at CarAudioCentre we offer a professional and reputable fitting service in all our stores. For all fitting enquiries and bookings please visit or call one of our nationwide stores. Our fitters can install your new car stereo, DAB radio, audio visual, speakers, subwoofers or amplifier. We can also help to connect your iPod or MP3 player to you existing audio unit and can offer the best advice on the right in-car entertainment for your vehicle, to further this more we also offer a total 100% custom installation service for demo and show vehicles. So if you have an idea come on in and run it past us, the possibilities are endless and we are never too busy for an enthusiastic chat about our favourite subject.

Please note:

"That our two year warranty on products is only applicable to purchases made directly from us and that have been fitted in one of our stores."

Our Stores: