Question: 13 January 2022
Hi I'm looking at the juice 1504 4 channel will run my 2 fusion subs rated 150 rms each?
Answer:
Hi,
It will but not very well. For subs, you need to use a Mono amp. Use the below
JA1201D 1200W Peak Power Mono Amplifier
JWTRU41 4 Gauge 2500w 2 Channel/Mono Amplifier Wiring Kit
Found Useful? Yes
Question: 25 November 2021
Car: Daihatsu
I got 4 Pioneer Speakers, Nakamichi 4x50w Stereo and an In Phase USW300 undersea sub/amp. Will this help increase the overall sound significantly as well as work well with the current set up I have?
Answer:
Yes by adding a good amp like teh Juice JA1504 inot your system it will make a massive difference to the sound.
JWTRU10 10G ATC Fused Amplifier Wiring Kit + RCAs
Found Useful? Yes
Question: 13 November 2021
Would this be strong enough to run a 10 kenwood sub 600 watts max and component speakers 400 watts x2 max one side being Bridged
Answer:
Hi,
What are the RMS ratings of the speakers? What is the impedance of the sub? Is it single or dual voice coil?
Found Useful? Yes
Question: 09 September 2021
Car: Citroen Berlingo - 1991>
I have 2x MTX Terminator 6.5" 2 way coax speakers (60W RMS @ 4 ohm 240W max) and I'm thinking of getting your JA1504 Amp with the JS8 subwoofer. Would this work okay? I also like the IPA8704D
Answer:
Hi,
The IPA8704D would be a better option for you. The power would be a lot cleaner
Found Useful? Yes
Question: 13 August 2021
Car: BMW
I have a bmw f31 2017 , I’ve got 2x 1000w JBL subs in the boot , will this amp be powerful enough to run them ?
Answer:
Hi,
No, use the below amp and wiring kit
InPhase IPA8701D 1 Ohm Stable 1600 Watts Monoblock with Subsonic Filter
JWTRU41 4 Gauge 2500w 2 Channel/Mono Amplifier Wiring Kit
Found Useful? Yes
Question: 07 August 2021
Dose it have high level inputs?
Answer:
Hi,
Yes this does have high level input.
Found Useful? Yes
Question: 24 May 2021
Car: BMW 1 Series (E81) - 2004> (E81)
Hi I have 2 vibe 115rms under seat subwoofers would this amp power them both? Thanks
Answer:
Hi,
You will be better off using a MONO amp. See below
JA1201D 1200W Peak Power Mono Amplifier
Found Useful? Yes
Question: 15 February 2021
Car: Subaru Impreza - 1994 >
Hi,
Front Alpine ss65c & rear alpine ss50. Would be powerful enough to run them all?
Thanks.
Answer:
Hi,
The below amp and wiring kit will be your best bet. For cleaner power delivery, consider putting a power cap in there
In Phase IPA8704D 2 Ohm Stable 1200 Watts Digital 4 Channel Amplifier
JWTRU41 4 Gauge 2500w 4 Channel Amplifier Wiring Kit + RCAs
JW2D Power capacitor 2.4 Farad High performance Digital voltage displace
Found Useful? Yes
Question: 10 February 2021
Car: VW Multivan - 2003>
Is there a plug and play harness for this amp? speaker line connections from OEM radio?
Answer:
Hi,
Sadly, there are not wiring harness to make this plug and play.
Found Useful? Yes
Question: 09 February 2021
Car: VW Touran - 2003 >
Hi guys
Quick question, is there any kind of warranty on this?
Cheers
Answer:
Hi,
These come with a 1 year warranty
Found Useful? Yes
Question: 07 February 2021
Hiya,
I have purchased this amp from yourselves, so with an rms per channel of 60w @ 4ohm, does that mean the max voltage output per channel is roughly around 15.9v, at full volume?
Answer:
Hi
Please contact your local store.
https://www.caraudiocentre.co.uk/store-finder.htm
Found Useful? Yes
Question: 20 January 2021
Hi I recently purchased In Phase Car Audio XTC6CX speaker system. Would this amp be a good match? What improvements could I expect to see from using an amp rather than through an aftermarket head unit
Answer:
Hi,
An amplifier will deliver more power to the speakers which increases volume and overall sound quality.
Found Useful? Yes