Question: 07 March 2021
Car: VW Golf - 2003 > MK5
Hi there would this work well with a single kenwood KFC-PS2516
Answer:
Hi,
You will be better going for the below amp
In Phase IPA601 2 Channel 2 Ohm Stable Amplifier with Subsonic Filter
Found Useful? Yes
Question: 03 September 2020
Car: Toyota Corolla - 2003-2006
hi there, would this amp run the pioneer TSA250S4 sub? if so would i be best with single coil or dual coil?
cheers
Answer:
Hi,
This amp would be fine. But if you haven't bought the amp, please consider the below.
IPA1601 2 Channel 2 Ohm Stable Amplifier with Subsonic Filter
Found Useful? Yes
Question: 01 September 2020
Car: VW Golf - 1983-1992 MK2
Would this amp work well with two pioneer Ts-a4670f?
Answer:
Hi,
Yes but the JA902 is a more robust amp and will run them better.
Don't get caught speeding buy a Road Angel Pure!
JA902 2 Channel 900W Bridgeable Amplifier
Found Useful? Yes
Question: 05 June 2020
Car: Audi A3 - 2003>
A3 2015 can I use this amp by tapping into rear car speakers to to get my input by connecting to speaker input on the amp Then all I have to do is power it a 12v live, earth for a 4ohm dvc 250rms sub
Answer:
Hi,
In theory, that should work for you.
I would advise speaking to our install teams for further info.
Found Useful? Yes
Question: 20 May 2020
Car: Honda Civic - 2005 >
His, is this amp any good for the audiobahn aw1251t? 400w rms?
Answer:
Yes the Pioneer will run that sub but not well as it does not haev enough power, you will need the Juice amp would be more suited.
JA902 2 Channel 900W Bridgeable Amplifier
JWTRU81 8 Gauge 1800w 2 Channel or Mono Amplifier Wiring Kit
Found Useful? Yes
Question: 13 May 2020
Car: Honda Civic - 1999-2005
Hi I'm running a set of Vibe slick series 2 6x9s and wondering if this amp would be ok to power them?
Cheers Chris
Answer:
The Pioneer amp would be fone for you Vibe speaker but the In Phase IPA601 works better with the Vibe speakers
IPA601 600 Watts 2 Channel Amplifier
JWTRU101 10 Gauge AGU Fused Amplifier Wiring Kit
Found Useful? Yes
Question: 26 April 2020
Car: Peugeot Bipper - 2008>
I am planning to link this to a pioneer head unit and full car speaker set up including 6x9 all pioneer, would I be able to do this as well as link a 600w fusion sub?
Answer:
No the Amp is not the corrcet one to use, Order the Juice JA1504 and wiring kit
JA1504 4 Channel 1500W Bridgeable Amplifier
JWTRU81 8 Gauge 4 Channel 1800w Amplifier Wiring Kit
Found Useful? Yes
Question: 05 April 2020
Car: VW Polo - 1998 - 2004
Hello I have a 1000 watt Pyle sub 500rms 4ohm. Would this amp be compatible with my sub.
Answer:
Yes it will but also look at the Juice Amp it will be much better then teh pioneer and give you more power
JA902 2 Channel 900W Bridgeable Amplifier
Found Useful? Yes
Question: 07 August 2019
I'm planning to power a Pioneer head unit off a 240v supply with a 12v 10a 120w AC DC Power Supply Adapter Transformer. Will this amp be compatible with my transformer? Thanks, Paul
Answer:
hi,
this amp would require a larger power supply unit as i think the fuse rating in the side of the amp is 20amp
Found Useful? Yes
Question: 02 July 2019
Car: VW Beetle - 1998>
On a 2ohmn bridged load can this amp run/handle a 300w rms sub?
Answer:
in short the answer would be no, this amp cannot run 2 ohm bridged but 4 ohm stereo would give you only 60wrms per channel, ipa1001 would be perfect as its 150W rms per channel at 4 ohm stereo which is how you would be best to run your subwoofer.
Found Useful? Yes
Question: 06 January 2019
Car: BMW 1 Series (E81) - 2004> (E81)
Will this amp be right for my speakers which are MB QUART QM100X BMW.
I would appericate your help
Thanks
Answer:
Hi
You are better using the below amplifier.
IPA601 600 Watts 2 Channel Amplifier
Found Useful? Yes
Question: 01 August 2018
Car: Audi A4 - 2007>
does this have AC input? i.e. can it be plugged into a 240v supply?
Answer:
no this is only for 12v use, please do not use without a 240 to 12volt adaptor
Found Useful? Yes