Pioneer GM-D1004 - 400W 4 Channel Easy Install Amplifier with TVC concept and input sensor

• Question: 25 April 2018
  Car: BMW 3 Series (E46) - 2005> (E90)
  
  After purchasing the Connects2 CT10BM05 Parrot T-Harness with this amp, does it become a more simple plug and play install?
  Thanks

  Answer: 
  the wiring for this amplifier requires you to either solder into the loom or use some kind of crimp connectors but yes a t harness would make it easier as they are colour coded

  Found Useful? Yes 

• Question: 20 March 2018
  Car: Suzuki Ignis - 2002 >
  
  I have a 2017 Suzuki Ignis SZ-T. This has an installed head unit (I think it is made by Pioneer) but I am hard of hearing and cannot hear this properly. Can this amplifier be used in this model

  Answer: 
  hi,
  
  yes it would be compatible with your car, as your car has the pioneer unit fitted it could be used with this amplifier to increase the overall volume of the system

  Found Useful? Yes 

• Question: 01 March 2018
  Car: BMW X5 (E53) - 2006> (E70)
  
  Hi will this fit in my x5 e70 2009
  Also is it plug and play or is soldering required to existing wiring loom
  Thanks

  Answer: 
  hi it will work in your car, none of these are plug and play they will require soldering into the original wiring loom.

  Found Useful? Yes 

Question: 18 February 2018
Car: BMW 5 Series (E39) - 2004> (E60)

Hi . I have a 2008 e6o with basic stereo . Will this work with mine please , cheers
Terry

Answer: 
Hi Terry

You can use the GM-D1004 in your BMW 5 Series. You will need the below listed T harness for installation.



CT10BM05 Parrot T-Harness

Found Useful? Yes 

Question: 14 January 2018
Car: Toyota Yaris - 2003 -2006

Hi, I already have a Pioneer MVH-X580DAB head unit fitted, would i need anything extra to fit this amp? and does it come with block conectors or loose wires for the input and outputs? cheers

Answer: 
Hi

As you are using aftermarket system this would plug in between the harness adapter and the radio connector.



Found Useful? Yes 

Question: 08 January 2018
Car: Jaguar X - Type - 2002 >

Hi if I but this amp for my x type will I need a harness to connect it up?

Thanks

Answer: 
you would need to know if your car already has an amplifier from factory as some of the jaguars do, if yours doesnt then you could use the following wiring loom but some soldering would be required

CT10JG01 Parrot T-Harness

Found Useful? Yes 

Question: 04 January 2018
Car: BMW Z4 (E85) - 2002-2008 (E85)

Hi, I have the MVH-X380BT, together with the steering control harness already fitted. Do I need any extra cables to fit this to the set up...is it just plugged into the existing harness? Many thanks.

Answer: 
you shouldnt require anything else to use this amplifier with what you have

Found Useful? Yes 

Question: 23 December 2017
Car: Audi A4 - 2007>

How can I bridge 2 channels of this amp to drive 2 full range speakers and a single subwoofer?

Answer: 
Hi

Please contact your local store.

https://www.caraudiocentre.co.uk/store-finder.htm


Found Useful? Yes 

Question: 15 December 2017
Car: BMW 3 Series (E46) - 2005> (E90)

2010 BMW E92 with Base head unit.
Will this amp work with the base head unit and what connectors would I need. Will I need to downgrade the signal from the head unit using an rca to speaker adapter.

Answer: 
Hi

The GM-D1004 can work with your original head unit. You will need the below listed T-harness for installation. Long as you use the below harness it will be plug and play. Do not need to use RCA to speaker adapter.



CT10BM05 Parrot T-Harness

Found Useful? Yes 

Question: 12 October 2017
Car: Renault Megane - Megane III 2007>

Hi, does this have a phono preout to an amplifier for a sub?

Answer: 
Hi

This does not have any preout for an external amplifier.

Found Useful? Yes 

Question: 04 June 2017
Car: Renault Traffic - 2000>

does this come with all the cables required to fit in a 2012 renault trafic (factory head unit with sat nav )

Answer: 
Hi,

thanks for your question, this amp requires the correct ISO-T harness to connect

Found Useful? Yes 

Question: 01 April 2017
Car: Toyota

Does this come with iso connector for the speaker terminals and not bare wires that need to cut and spliced into harness?

Also have an aftermarked hu fitted so do I need a T harness?

Answer: 
Hi

This has stanadrd ISO connectors. You will not need an T harness as you are using an after market unit.

Found Useful? Yes 

Question: 21 February 2017
Car: Ford Fiesta - 2008>

Hi
I'm thinking of buying this a amp. to run with the factory head unit of my 2013 fiesta. Do you have a wiring harness to simplify the fitting. Will run set of Alpine SPR-60C + SPR-60 with the amp

Answer: 
Good afternoon you could use a t-harness to simplify the cabling (CT10FD09).

CT10FD09 Parrot T-Harness

Found Useful? Yes 

Question: 30 September 2016
Car: Ford Focus - 2004>

Hi is this plug and play in focus 2014 Factory head unit. or will I have to connect it to the battery as the radio fuse is 7.5 I heard. And will I have to cut any wires.

Answer: 
Hi

Contact your local store.

https://www.caraudiocentre.co.uk/store-finder.htm

Found Useful? Yes 

Question: 12 August 2016
Car: Ford KA - 1997>

Factory head unit. Is this plug and play or will I have to connect it to the battery as the radio fuse is 7.5 I heard. And will I have to cut any wires for the speakers or do I need a harness?

Answer: 
Hi

You can use the below T Harness. This way yo do not have to cut any cables.

Connects2 Ford KA T-Harness Parrot Adapter for Phone Kit 1996 Onwards

Found Useful? Yes 

Question: 30 July 2016
Car: VW Polo - 1998 - 2004

i am retaining OEM Beta head unit. Can that supply pre-outs that would suit this amp? If not can this amp recieve powered outputs? Can you supply connectors to avoid cutting wiring harness? Thanks!

Answer: 
Hi

This amplifier is universal will work in your VW Polo without any additional leads and there is no need to cut any cables.



Found Useful? Yes 

Question: 18 July 2016
Car: Renault Megane - Megane III 2007>

I have the quad lock connector for the radio with a connect2 steering hareness in my car is it still possible to output via existing speaker wiring? I have a Sony Mex-5100bt
Thanks Dan

Answer: 
Hi,

thanks for your question, for the GM-D1004 you can use the existing wiring.

Found Useful? Yes 

Question: 04 June 2016
Car: Renault Megane - Megane III 2007>

Would this amp be plug and playable with the Renault oem stereo and a pair of alpine spg 13cs.

Thanks.

Answer: 
hi there, the amp will be fine to work on the factory set up on your Renault as it has a high level input option (this will come direct form your factory unit)

Found Useful? Yes 
• 

Need help with Installation?

Here at CarAudioCentre we offer a professional and reputable fitting service in all our stores. For all fitting enquiries and bookings please visit or call one of our nationwide stores. Our fitters can install your new car stereo, DAB radio, audio visual, speakers, subwoofers or amplifier. We can also help to connect your iPod or MP3 player to you existing audio unit and can offer the best advice on the right in-car entertainment for your vehicle, to further this more we also offer a total 100% custom installation service for demo and show vehicles. So if you have an idea come on in and run it past us, the possibilities are endless and we are never too busy for an enthusiastic chat about our favourite subject.

Please note:

"That our two year warranty on products is only applicable to purchases made directly from us and that have been fitted in one of our stores."

Our Stores: